Mountain Bike Disc Brake Maintenance
Advice for entry level bike: Raleigh/Giant/Haro?
I’ve been looking around for an entry level mountain bike, and I’ve stopped by three local bike shops – each has recommended a different brand/model. Can anyone comment on these models, and give me some advice? I believe they are all front-suspension with disc brakes. The models and approx prices are: Raleigh Mojave 4.0 ($350), Haro Flightline Sport ($430), Giant Yukon ($500). The Giant looked the “beefiest”, but it’s also the most expensive. I don’t plan on doing anything too crazy like taking 10′ jumps, so what is a good, low maintenance, quality bike to go with? Feel free to recommend other brands/models. Thanks.
All the bikes you listed are respectable.
Fit is more important than anything.
And get the bike you think you will need for next yr – so you won’t be dissapointed if you love it and ride it more.
At this pricing levels – For more money in general you get the following.
LIttle bit lighter bike (components and frame)
Little bit smoother shifting and better braking.
Little bit longer lasting parts (won’t need adjusting or replacement as often as cheper ones – therefore lower maint.)
A better front shock (maybe more bump absorbtion and more adjustability)
The bikes that you listed arenn’t direct competitors.
You have compared a 350 bike to a 450 bike & a 500 bike.
Each brand has a 350, 450 and 500 bike….give or take a few bucks …ANd a $400 bike in either of the 3 brands is very similar to any other $400 bike.
For example – multiple models in each line – low end competes with low end etc…the Yukon compares better to the Mojave 5.0 (not the 4.0).
In the 3 Brand you listed there are several choices all priced accordingly ($350 -600) .
Raleigh – Mojave – 2.0, 4.0, 5.0 & 8.0
Haro – Flightline ONe,Two, Sport, Comp…
Giant – Boulder – Rincon – Yukon
Buy from the Shop you like the best – and buy the best bike you can afford. My advice – don’t spend less than $450 if you plan to ride on real Mtn bike trails – more is better mainly for the better front shock (Rock Shox) and better components Deore if you can afford it – Front Shox can cost $300 by themselves if you have to replace a cheap one later.
But if you never plan to leave the pavement buy the cheapest bike you like.
If you can affors $500 bucks I would call the 3 shops and ask for the best bike they can put you in for that amount (make sure they have your size in stock – they can discount bikes in stock more than special orders) and also ask about any last yr model closeouts – you may be able to get a $600 bike for $450 becasue it’s last yrs model.
You are smart to buy 1st bike form a local shop. Ask if any servie come with it – some shops offer free lifetime adjustments. That is worth something.
If you have 1 of these in your city check them out too – www.performancebike.com – they sell the ironhorse & other brands like GT & Mongoose.
Cycling Maintenance for Mountain Bikes : Remove Brake Pads on Mountain Bikes
|
|
The Bicycling Guide to Complete Bicycle Maintenance and Repair: For Road and Mountain Bikes(Expanded and Revised 5th Edition) $9.39 This revised, updated, expanded fifth edition is indispensable-with all the latest models, parts, and repair techniques, and terrific money-saving tips to keep any ride in tip-top shapeSince its first publication, Bicycling Magazine’s Complete Guide to Bicycle Maintenance and Repair has sold over 400,000 copies. The fifth edition is guaranteed to remain the category killer. This long-overdue updat… |
|
|
Hayes Disc Brake Bleed Kit $14.75 Hayes Bleed KitsItem SpecificationsFitsHayes Hydraulic Brakes… |
|
|
Shimano XTR Disc Brake Rotor While these may not jump out at you and scream high tech, the XTR Disc Brake Rotors are actually the result of some forward thinking by the folks at Shimano. The big headline is Ice Tech. Technically these XTR Ice Tech Rotors are a composite. Two layers of stainless steel are bonded to an aluminum core. So you get the benefits of both — the durability and powerful braking properties of stainless … |
|
|
Park Tool Rotor Truing Gauge – DT-3 You don’t know how your rotor bent. It could of been the brutally bouncy shuttle ride up the side of a mountain, or maybe it was that twenty-yard cartwheel your bike enjoyed into the forest. What ever the case, accurately straighten it with the Park Tool DT-3 Rotor Truing Gauge.Product FeaturesTire Levers: Spoke Wrench: Hub Tool: Cassette Tool: Chain Tool: Headset Tool: Crank Puller: BB Tool: Cabl… |
